Advisor Advanced ATSx000A(-IP) Installation and Programming Manual 93
User privilege limitation
The User adding option (see Table 24 on page 91) determines whether the user
can add new users and what user rights these newly created users have.
Table 25: User adding possibilities
User cannot create new users.
User can create new users, but he is only allowed to set permissions equal to or
lower than his own.
For example, if his user group does not allow changing the date and time, he
cannot provide this permission to any user by editing a user group, nor assign a
user to an existing user group with that permission. This affects options as well
as areas. For example, if the user has access only to Area 1, he cannot give
access to Area 2 to another user.
User can create new users with any permission.
See also āUser data lockā on page 83.
3.2.n.6 Remove user group
To remove a user group, select a user group using the cursor, or by entering the
user group number, and go to the Delete UG menu.
The display shows:
Choose Ok and press Enter. This removes the user group.
Repeat the command to delete other user groups, or press Clear to exit and
return to the higher menu level.
Note: You cannot delete a user group if you have users, actions or central
stations assigned to it.
To Next Page
Loading...
