Interlogix Advisor Advanced ATS 000A Series User Manual

30 Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
Action
Programmed method
Key sequence
[1]
Menu access [2]
Menu access with PIN
Menu, PIN, Enter

PIN, Menu

Menu access with card
Menu, card

Menu access with card and PIN
Menu, card, PIN, Enter

Card, PIN, Menu

Duress [4]
Duress with PIN
Any set key (On / Off / Partset),
duress code, Enter

Duress code, any set key

Duress with card and PIN
Any set key (On / Off / Partset),
duress code, card, Enter

Card, duress code, any set key

Change keypad
buzzer volume
Increase volume
X + Right

Decrease volume
X + Left

Panic [5]
Panic alarm
1 + 3

Exit [6]
Quick exit from the programming
Menu + Clear

Active alarms [7]
Display active zones and faults
that should be acknowledged
Function, Function

Alarm memory
[7]
Display alarms that occurred
when set
Enter, Enter

[1] Use the check box to note which options are available for this system.
[2] The functionality depends on “8.7.3 Authorization” on page 155.
[3] The functionality depends on “8.7.8 Easy unset” on page 157.
[4] The functionality depends on “8.7.4 Duress method” on page 155.
[5] Panic alarm functionality depends on the “8.8.1 Panic mode” option described on page 158. It
also depends on the “2.2.1.n.3.18 1+3 keys” option described on page 74.
[6] The function works only if there is no prompt that requires a user response or action. It is
disabled, for example, during wireless devices learning.
[7] The functionality depends on “8.3.3 Alarm list” on page 148.
Common key sequences for keypad without LCD
Table 8: Common key sequences for keypad without LCD
Action
Programmed method
Key sequence
[1]
Set [2]
Set with PIN
On, PIN, On

Set with card
Card

On, card

3 x card

Set with card and PIN
On, card, PIN, On

Card, PIN, On


Interlogix Advisor Advanced ATS 000A Series Specifications

General

Brand	Interlogix
Model	Advisor Advanced ATS 000A Series
Category	Control Panel
Language	English