Interlogix Advisor Advanced ATS 000A Series - Test Menus

34 Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
2. Program up/download facilities using menu “9.4 PC connection” (see
page 188).
3. Program necessary condition filters using menu “6.1 Condition filters” (see
page 117).
4. When outputs are used, program menu “6 Outputs and filters” (see
page 116).
5. Program the custom LCD text in menu “8.3.2 Custom message” (see
page 147).
6. Program shock sensors using menu “4.1.n.7 Gross and Pulse options” (see
page 104).
7. Program schedules and actions for them using menu “7 Calendar” on page
127.
8. Program function keys in “2.2.1.n.3.10 Function keys” on page 72.
9. Program wireless devices. See “Wireless device programming” on page 197
for details.
10. Program PIR cameras. See “Using cameras” on page 203 for details.
Test menus
After programming, the system has to be tested. Menus providing support in
testing are:
Table 10: User menus with test options
Menu entry
Description
1 Inhibit zones
View and inhibit / uninhibit any zone
2 Isolate zones
View and isolate / de-isolate any zone
3 Display logs
Lists all events that occurred
4 Panel status
Provides system information, including open zones
8 Service menu
Provides walk test and test call
Table 11: Installer menus with test options
Menu entry
Description
1 Service menu
Lists all events that occurred
Lists all active zones, tampers and faults
Perform various tests and diagnostics
Allows reinstalling the system
2 Device menu
Lists all keypads and expanders and their current statuses
4 Zones and RF fobs
Isolates / de-isolates zones
9 Dialler menu
Allows you to ping the selected central station or PC