148 Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
This records 16 characters of customized text that is displayed on the top line of
LCD keypads instead of the default text. Characters include numbers, spaces, or
punctuation.
8.3.3 Alarm list
The option defines how zone alarms and faults can be viewed on LCD by an
unlogged user.
• Disable: Zone alarms and faults are not shown.
• Enable: The alarm list option allows users to list active zones and faults as
well as alarms.
See “Common key sequences” on page 29.
• Instant: Additionally to the alarm list option above, alarms are shown instantly.
Note: Alarms and faults are not shown if Armed display is active. See “8.3.1
Armed display” on page 147 for details.
8.3.4 Indicate faults
4 Indicate fault
>Always<
The option defines when faults are indicated on LEDs. The following options are
available:
• Always: Faults are always shown.
• On set: Faults are displayed only during system setting attempt.
8.3.5 View EE timer
The option defines if the entry and exit timers are displayed during setting and
unsetting the system.
Set options
8.4 Set options
1>RTS options
2 Inhibit incl
Options on the Set options menu define the set conditions.
To Next Page
Loading...
Need help?
General
