126 Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
Use the Trigger name screen to enter or change the trigger name. The trigger
name can contain up to 16 characters.
6.3.n.2 Delete trigger
To remove a trigger, select a trigger using the cursor, or by entering the trigger
number, and go to the Delete trigger menu.
The display shows:
2 Delete trigger
>Cancel<
Choose Ok and press Enter. This deletes the trigger.
Repeat the command to delete other triggers, or press Clear to exit and return to
the higher menu level.
Note: You cannot delete a trigger unless your user group authorizes you to do
so.
To Next Page
Loading...
Need help?
General
