www.intermatic.com
6
MultiWave Control System Programming and User Guide
Chapter 5:
Programming — Freeze Option Screen
. . . . . . . . . . . . . . . . . . . . . . . . . . 28
Conguring the Freeze Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Dening the Circuits for the Freeze Condition . . . . . . . . . . . . . . . . . . . . . . . 28
Determining Speed During Freeze Condition . . . . . . . . . . . . . . . . . . . . . . . . 29
Enabling/Disabling Heater During Freeze Condition . . . . . . . . . . . . . . . . . . . . 29
Dening Actuator Pool/Spa Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Chapter 6:
Programming — Variable Speed Pump Options Screens
. . . . . . . . . . . . . 30
Pentair
®
Variable Speed Pump Options Screen . . . . . . . . . . . . . . . . . . . . . . . . . 30
Conguring Pentair Variable Speed Pump Names . . . . . . . . . . . . . . . . . . . . . 30
Conguring Pentair Variable Speed Pump Speeds . . . . . . . . . . . . . . . . . . . . . 31
Setting a Pentair Variable Speed Pump Maximum Speed . . . . . . . . . . . . . . . . . 31
Jandy
®
, Hayward
®
, Century
®
, Marathon
®
, and Speck
®
Variable Speed
Pump Options Screens
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Conguring Other Variable Speed Pump Names . . . . . . . . . . . . . . . . . . . . . . 31
Conguring Other Variable Speed Pump Speeds . . . . . . . . . . . . . . . . . . . . . 32
Setting an Other Variable Speed Pump Maximum Speed . . . . . . . . . . . . . . . . . 32
Chapter 7:
Configuring Salt Chlorine Generator Options
. . . . . . . . . . . . . . . . . . . . . 33
Chapter 8:
Labeling Circuits on Controller and Receiver . . . . . . . . . . . . . . . . . . . . . 34
Labeling the PE953 Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Labeling the PE653 Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Chapter 9:
Checking Out and Verifying the System
. . . . . . . . . . . . . . . . . . . . . . . . . 35
Verifying the Controller Screen Is Operating Properly . . . . . . . . . . . . . . . . . . . 35
Verifying Current Time of Day Is Congured in the Controller . . . . . . . . . . . . . . . 35
Verifying the Controller Is Communicating with the Receiver . . . . . . . . . . . . . . . 36
Verifying the Receiver Is Operating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Verifying Controller Activates Valve Actuators on Command . . . . . . . . . . . . . . . 36
Verifying Heater Responds to Commands from Controller . . . . . . . . . . . . . . . . 37
Chapter 10:
Programming — Use with Z-Wave Home Control Devices . . . . . . . . . . . . 38
Including Z-Wave Devices into the Network . . . . . . . . . . . . . . . . . . . . . . . . 38
Adding Z-Wave Devices to Scenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Conguring Scene Names in Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Controlling Z-Wave Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Removing Z-Wave Devices from Scenes . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Removing Z-Wave Devices from a Network . . . . . . . . . . . . . . . . . . . . . . . . 40