INVT GD100-0R4G-SS2-PV - P11 Group Protective Parameters

Goodrive100-PV series solar pumping inverters Function parameters
-57-
Function
code
Name
Detailed illustration of parameters
Default
Modify
1: Detection indicates the system does
not contain the boost module.
P18.11
Current pump flow
Unit: cubic meter/hour
0.0
●
P18.12
Current pump lift
Unit: meter
0.0
●
P18.13
MSBs in total pump
flow
This function code displays the 16 most
significant bits (MSBs) in the total pump
flow. Unit: cubic meter
0
●
P18.14
LSBs in total pump
flow
This function code displays the 16 least
significant bits (LSBs) in the total pump
flow. Unit: cubic meter. Total pump flow =
P18.13*65535+ P18.14
0.0
●
P18.15
Total pump flow
resetting
Setting this value to 1 can reset the total
pump flow. P18.13 and P18.14 will
accumulate the flow after resetting. After
the resetting succeeds, P18.15 is
automatically set to 0.
0
◎
P19 Group Voltage boost (converter module communicates with boost module
through 485)
P19.00
Boost voltage loop
KP
0.000~65.535
0.500
○
P19.01
Boost voltage loop
KI
0.000~65.535
0.080
○
P19.02
Boost current loop
KP
0.000~65.535
0.010
○
P19.03
Boost current loop
KI
0.000~65.535
0.010
○
P19.04
Upper limit of the
output current of
boost voltage loop
Upper limit output of mppt voltage loop
PI, upper limit of the boost current loop
reference current
12.0A
○