INVT SV-DA200 Series

To Next Page

To Previous Page

INVT SV-DA200 AC Servo Drive PROFINET Technical Guide V2.63

Click Synchronization. Set Synchronization role to Sync master. See the following figure.

2.4.4 Configuring DA200 drive

(1) Click INVT-1. Choose PROFINET interface_1 [X1] > Port1- RJ45[X1 P1 R] > Port interconnection,

and set partner ports. In the example, Port1 of the INVT-1 drive is connected to Port1 of the INVT-1_1

drive. See the following figure.

Other manuals for INVT SV-DA200 Series