INVT SV-DA200 Series

INVT SV-DA200 AC Servo Drive PROFINET Technical Guide V2.63
12
Then double-click to open the project view, as shown in the following figure.
2.3.2 Adding the GSD file
In the project view, choose Option (N) from the toolbar. Then choose Manage general station
description files (GSD). In the dialog box that appears, enter the source path of the GSD file, select the
GSD file, and click Install.
If the installation is successful, the following dialog box appears.
2.3.3 Configuring basic information on project
(1) Enter the project view.