INVT SV-DA200 - Page 189

SV-DA200 series AC servo drives Faults and solutions
‐179‐
PtP1.72 86
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP1.74 87
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP1.76 88
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP1.78 89
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP1.80 90
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP1.82 91
st
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP1.84 92
nd
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP1.86 93
rd
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP1.88 94
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP1.90 95
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP1.92 96
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP1.94 97
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP1.96 98
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP1.98 99
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
This group of parameters are used to set the 50
th
~99
th
control word. Refer to PtP0.00 for detailed
instruction.
PtP1.00
Data size 32bit Data format HEX
Modbus address 3400,3401 CANopen address 0x2C00,0x00
PtP1.02
Data size 32bit Data format HEX
Modbus address 3404,3405 CANopen address 0x2C02,0x00
PtP1.04
Data size 32bit Data format HEX
Modbus address 3408,3409 CANopen address 0x2C04,0x00
PtP1.06
Data size 32bit Data format HEX
Modbus address 3412,3413 CANopen address 0x2C06,0x00
PtP1.08
Data size 32bit Data format HEX
Modbus address 3416,3417 CANopen address 0x2C08,0x00