INVT SV-DA200 - Page 198

SV-DA200 series AC servo drives Faults and solutions
‐188‐
PtP2.28
114
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP2.30
115
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP2.32
116
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP2.34
117
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP2.36
118
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP2.38
119
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP2.40
120
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP2.42
121
st
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP2.44 122
nd
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP2.46
123
rd
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP2.48
124
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP2.50
125
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP2.52
126
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
PtP2.54
127
th
control word
Setting range Default Unit Available mode
0~0x7FFFFFFF 0x00000000 - P
This group of parameters are used to set the 100
th
~127
th
control word. Refer to PtP0.00 for
detailed instruction.
PtP2.00
Data size 32bit Data format HEX
Modbus address 3600,3601 CANopen address 0x2D00,0x00
PtP2.02
Data size 32bit Data format HEX
Modbus address 3604,3605 CANopen address 0x2D02,0x00
PtP2.04
Data size 32bit Data format HEX
Modbus address 3608,3609 CANopen address 0x2D04,0x00
PtP2.06
Data size 32bit Data format HEX
Modbus address 3612,3613 CANopen address 0x2D06,0x00
PtP2.08
Data size 32bit Data format HEX
Modbus address 3616,3617 CANopen address 0x2D08,0x00