INVT SV-DA200 - Page 246

SV-DA200 series AC servo drives Communication
‐236‐
etc.
2. Channel selection area: Choose the display content of the channel monitoring, support parameter
selection and two modes of the internal variable function codes
3. Display control area:
a. Operating interface: Control the starting, stopping, moving and magnifying of the oscilloscope
waveform and the displaying of the cursor, zero and trigger threshold;
b. Page replay interface: Be used in the USB trigger mode and waveform file restoring mode,
including the function of starting, stopping, and moving and position selection;
c. File operations interface: Saving and restoring of csv waveform file and the figures;
4. Communication control area: Control the starting and stopping of the oscilloscope communication,
saving of the channel data, switching of the high-speed and low-speed oscilloscope (valid in the USB
mode), setting in the trigger mode and help.
5. Information display area: Display the name of the current monitored content, display or hide the
result and so on.