Found 3 Devices
INSTRUCTIONS - WISEINSIGHT
Launch Device
23
Add Device
Choosing “Launch Device” will open the WiseWay GUI in your
default web browser for any device selected (highlighted) in
the station menu.
Add a device manually by entering its IP Address. Give it a
name to help you remember the device.
In the MIB setting field, for ION devices, choose the setting:
“KH-RFC1628_UPS_MIB|KECA_THS_MIB”
2022, use KH-RFC1628_UPS_MIB. Gen 2 cards have 2 lights, not 3, and also
have a green “AB” terminal port. Gen 1 cards have 3 lights and no green
terminal port.)
1.
3.
WiseInsight - Device Menu
Search Device
Update Device
Search Device will scan your network for any ION UPS systems,
and potentially other brand UPS systems on your network,
so you can add them to the WiseInsight software. Note: This
software may not be compatible with all brands of UPS devices.
Allows you to change the name of the device highlighted in the
Station menu. You can also change the MIB setting.
2.
4.
The following instructions will go through options available under the “Device” menu. A UPS device
must be highlighted under the “Station” menu for several of these options to work.
(NOTE: for Gen 2 SNMP cards on UPS units purchased after June
To Next Page
Loading...
Need help?
General
