INSTRUCTIONS - WISEFIND
Install
7
Main Interface
Open the WiseFind_Setup.exe program to install the software.
(See addendum, Page 35, for information on Windows 10
installation.) Follow the on-screen instructions provided by the
setup wizard. On the User Information Screen, you may change
the name of the user and organization. DO NOT CHANGE the
default software serial number: KECA-NNET-FIND-EXEE
The main WiseFind screen includes capabilities to search
for UPS devices, launch the WiseWay GUI interface on your
browser, assign and change network information for connected
UPS devices (including IP addresses for connected devices).
1.
3.
WiseFind
Launching Program
Search
After installation, WiseFind can be opened by double-clicking
the program icon.
After ION UPS devices are attached to your network and
switched on, perform a search by clicking the search button.
The initial IP of the device(s) should read 192.168.0.100. You
will also see the SNMP card serial number and MAC address
for each ION device on your network. The software will search
every 20 seconds automatically.
2.
4.
To Next Page
Loading...
Need help?
General
