QUICK START GUIDE
WiseFind (UPS ID)
5
WiseFind is used to identify ION UPS products on your
network. UPS devices must be connected to the network
with Ethernet cable via the included SNMP card. Start with
WiseFind to change the IP/Subnet/Gateway info of the
card with WiseFind. The default IP is 192.168.0.100. This
must be changed to use your UPS SNMP Card.
1.
WiseWay (UPS GUI)
Log in to the UPS GUI (called WiseWay) to monitor and
remotely control functions of your UPS. View real-time
data, export event logs, remote shutdown and restart,
program alerts, set planned tasks, add users, and more.
(*There is no program installer for WiseWay.)
2.
WiseInsight (UPS Map & Alerts)
Set alerts in WiseInsight to receive emails, screen pop-
ups and audible alarms when there is a power event that
affects your UPS system. Use WiseInsight “map” your UPS
network, find problems, and launch the UPS WiseWay GUI
to control problem units, including shutdown and restart.
4.
WiseClose (Safe Shutdown)
Use WiseClose to safely shutdown your Windows-based
PC or server before the UPS battery is exhausted during a
long-duration power outage or a UPS alarm event.
5.
WiseInsight (UPS Monitoring)
Add multiple UPS devices to WiseInsight by IP address
(including some other brands). Here, you can monitor
statistical data about each network-connected UPS, such
as input and output voltage, load, temperature, power
interruptions, and more.
3.
To Next Page
Loading...
Need help?
General
