ION ION-F18L-Series User Manual

INSTRUCTIONS - WISEINSIGHT
WiseInsight - Main Dashboard Tabs
Real Data
Displays the real-time data of the device, including input,
output, battery, load, and bypass information.
1.
The main dashboard “tabbed” menu, which becomes visible after double-clicking a UPS device in the
“Station” menu, provide real-time data on the selected UPS.
Real Chart
Display the real-time data of the device by diagram. This is real-
time data. The dials show battery remaining percentage*, UPS
load percentage, and unit temperature. The line graph across
the bottom displays the real-time voltage curve and updates
every few seconds. It shows input voltage, output voltage and
bypass voltage. On single-phase UPS systems like ours, input
and bypass voltage is the same.
*Must have battery management enabled in SNMP UPS Settings
menu.
2.
Real State
Displays the real-time alarm status of the UPS. During normal
operation, all indicators should read “no” in green. During an
alarm or abnormal state, you will see a red “yes” indicator next
to the issue at hand.
3.
Device Info
Displays basic information of the device, including the device
name, model number, location, etc. Some of these settings
can be set in the WiseWay GUI when connected to the device
under the “Settings and Control”-->”System Setting” menu.
4.
29

ION ION-F18L-Series Specifications

General

Brand	ION
Model	ION-F18L-Series
Category	UPS
Language	English