35
ADDENDUM - WINDOWS 10 INSTALLATION
Windows 10 Installation
Win10Pcap Setup Wizard
If installing on WiseFind and WiseInsight on Windows 10, you
will need to also install the “Win10Pcap” plugin, which comes
with installers for both software pieces.
You only need to install this once when installing the
programs. EG: If you install WiseFind first and install the
Wise10Pcap plugin, you do NOT need to install it when doing
the WiseInsight setup. Likewise, if you install WiseInsight first,
you will not need to install it again during the WiseFind setup
process.
The Wib10Pcap installer prompt will pop-up automatically
during installation. Follow the on-screen instructions to
complete the installation process.
1.
Event Log
The Event Log button brings up a window showing a log of
power events captured by WiseClose.
You can also save the log as a CSV file, print it to a local or
network printer or clean it (delete entries).
5.
Alarm Prompt Dialog
When the utility power fails or the UPS has an alarm, an alarm
prompt dialog box appears in the lower right corner of the
screen with a countdown timer. The countdown timer shows
how much time remains before WiseClose sends the operating
system of the PC or server the safe shutdown command.
6.
To Previous Page
Loading...
Need help?
General
