ISHIDA UNI-7 series - Chapter 9 Program Mode; 9.1 Program Mode Entry; 9.2 PLU File Registration; 9.4 Operator Registration

Chapter 9 PROGRAM MODE
9
PROGRAM MODE
9.1 PROGRAM MODE ENTRY
1.
Ensure that the initial screen is displayed.
2.
Press the [MODE] key on the key sheet.



The Operation Menu Select screen appears.
Then, press the [PROGRAM] button on the screen.
3.
The Program Menu Select screen appears.
To change the pages, press the [
b] or [
a
] button on the screen.

Uni-7 User’s Manual 9-1