ISHIDA UNI-7 series User Manual

Chapter 9 PROGRAM MODE

9.18.2 CHANGING EXISITING TABLES
1.
Press the "Lookup Table” field on the Program Menu Select screen.
2.
The Lookup Table screen appears.
3.
Select a desired header table by pressing the corresponding field.
EXAMPLE Table number “2”.
or press the [PLU] key on the key sheet after a numeric entry.

Î


9-106 Uni-7 User’s Manual

ISHIDA UNI-7 series Specifications

General

Brand	ISHIDA
Model	UNI-7 series
Category	Scales
Language	English