ISHIDA UNI-7 series User Manual

Chapter 9 PROGRAM MODE
26.
Press the [ESC] key on the key sheet to escape from text editing mode.


The confirmation screen appears. Then, press the [SAVE] button.
27.
The edited text has been registered. Then, press the Return button.
28.
The Lookup Table screen appears
29.
Repeat steps 22 through 28 for more header registrations.


Uni-7 User’s Manual 9-105

ISHIDA UNI-7 series Specifications

General

Brand	ISHIDA
Model	UNI-7 series
Category	Scales
Language	English