New functions:
• added Hardware Version information on main tab in web page and Modbus
register
• new action in the Modbus register no 0 – enter bootloader
• added RS485 biasing control for MINI modules with a hardware version >= 2.0
(option unavailable in MIX modules)
• www page: RS485 Biasing Resistors activation option (shows only in MINI
modules with a hardware >= 2.0)
Improvements:
• fixed modules names on web page (added -H for all modules with hand
operation switches)
Table
1
Revision history
1.2 Safety rules
• Note: Incorrect wiring of this product can damage it and lead to other hazards.
Make sure the product has been correctly wired before turning the power ON.
• Before wiring, or removing/mounting the product, be sure to turn the power OFF.
Failure to do so might cause an electric shock.
• Do not touch electrically charged parts such as the power terminals. Doing so might
cause an electric shock.
• Do not disassemble the product. Doing so might cause an electric shock or faulty
operation.
• Use the product within the operating ranges recommended in the specification
(temperature, humidity, voltage, shock, mounting direction, atmosphere etc.).
Failure to do so might cause a fire or faulty operation
• Firmly tighten the wires to the terminal. Insufficient tightening of the wires to the
terminal might cause a fire.
To Next Page
Loading...
