#28
iStorage diskAshur
®
M
2
User Manual v1.4
www.istorage-uk.com
6. Right-click in the blank area over the Unallocated section, and then select New Simple Volume.
7. The Welcome to the New Simple Volume Wizard window opens. Click Next.
8. If you need only one partition, accept the default partition size and click Next.
9. Assign a drive letter or path and click Next.
10. Create a volume label, select Perform a quick format, and then click Next.
11. Click Finish.
12. Wait until the format process is complete. The diskAshur M
2
will be recognised and it is available for use.
To Next Page
Loading...
