3-18
PRE-DRIVING OPERATIONS AND ADJUSTMENTS
4. Place the transmitter in the key and
close the cover.
2. Open the battery cover and remove
the battery.
3. Insert a new battery and close the
battery cover.
ADVICE
• Be careful not to bend the electrode
when placing a new battery.
• When closing the battery cover and
key cover, check that there is no
dust, hair or anything else caught
underneath it. A poorly sealed
remote control unit could become
deteriorated.
Transmitter
Battery
cover
Battery
Battery
holder
NOTE
• The QR code on the label shows
the serial number of the key.
QR code
5108428_sec03_PRE-DRIVING OPERATIONS.indd 18 2020/11/06 10:49:01
To Next Page
Loading...
Need help?
General
