4-146
CONTROLS AND INSTRUMENTS
Manual Transmission
ADVICE
• Make a shift into the reverse gear
from a forward gear or into a
forward gear from the reverse gear
only when the vehicle has come to
a complete stop. In addition, do not
shift gears without fully depressing
the clutch pedal.
Otherwise, the transmission may be
damaged.
• Do not pull up the ring except when
shifting the gearshift lever to "R".
• If you encounter any of the following
conditions, the vehicle may be
malfunctioning. Have your vehicle
inspected/serviced at the nearest
Isuzu Dealer as soon as possible.
- The collar cannot be pulled up.
- Even while the collar is pulled
up, the gearshift lever cannot be
shifted into the "R" position.
- Even after returning the gearshift
lever to the "N" position, the collar
does not return to its original
position.
When making a gearshift, depress the
clutch pedal fully.
To shift the gearshift lever to "R", pull up
the ring while shifting. When the gearshift
lever is placed into "R (reverse)", the back
up lights come on and a buzzer sounds.
Collar
5108428_sec04_CONTROLS AND INSTRUMENTS_P143-end.indd 146 2020/11/12 15:28:52
To Next Page
Loading...
Need help?
General
