Isuzu D-MAX 2020 User Manual

4-25
CONTROLS AND INSTRUMENTS
IlluminationofCenterDisplay
When the power mode is "ON" (models
with passive entry and start system) or the
starter switch is in the "ON" position (models
without passive entry and start system),
the illumination brightness is automatically
adjusted according to the brightness
inside the vehicle. The initial setting is
"Automatic". By changing to "Manual", the
illumination brightness of both the meter
and MID can be individually set.
Perform "Manual" setting at "Illumination
mode" displayed in the MID main routine,
after changing from "Automatic" to
"Manual" in "Illumination mode".
Multi-InformationDisplay(MID)
 →Refertopage 4-26
CAUTION
• Do not place any objects in front of
the sensor. Doing so will reduce the
sensitivity of the sensor, and will not
operate properly.
RTUL40SH007701
Light sensor
5108428_sec04_CONTROLS AND INSTRUMENTS_P001-142.indd 25 2020/11/09 14:06:51

Isuzu D-MAX 2020 Specifications

General

Brand	Isuzu
Model	D-MAX 2020
Category	Automobile
Language	English