6-8
SERVICE AND MAINTENANCE
Tools
Storage Location
Regular Cab Model
The tools are positioned behind the right
side seat, the jack is positioned behind the
left side seat. Tilt the seatbacks forward to
take out the jack and tools. To remove the
jack, turn the jack socket counterclockwise
so that the ram is lowered away from the
holder. Remove the jack when the ram is
fully lowered.
Adjusting the Driver Seat
→Refertopage 3-60
Extended Cab Model
The jack and tools are positioned in the
storage compartment behind the right front
seat. Open the cover to take out the jack
and tools. To remove the jack, turn the jack
socket counterclockwise so that the ram is
lowered away from the holder. Remove the
jack when the ram is fully lowered.
Second Seat (Extended Cab Model)
→Refertopage 3-65
ADVICE
• It is recommended that you familiarize yourself with the contents and use of the
various tools and the jack before using them.
• After finishing work with the tools, return them to the correct storage location
and ensure that they will not move while the vehicle will be in motion.
• Store the jack in its original position and turn the jack socket clockwise so that it
is secured (as a guide, with a force of 0.5N·m (0.05 kgf·m/0.36lb·ft)).
5108428_sec06_SERVICE AND MAINTENANCE_P001-140.indd 8 2020/11/05 11:54:07
To Next Page
Loading...
Need help?
General
