4-153
CONTROLS AND INSTRUMENTS
The cruise control function allows you to drive the vehicle at a constant speed without
operating the accelerator pedal. Cruise control can be used at vehicle speeds from
approximately 30 km/h (20 MPH) to 160 km/h (100 MPH) (type 1) or at those of
approximately 40 km/h (25 MPH) or more (type 2). This function should only be used
when driving without frequent starting and stopping, such as when driving on an
expressway.
Cruise Control
Cruise Control Switch (Type 1)
No. Description
1 SET switch/- switch
2 RES switch
3 SET switch/+ switch
4 Main switch
5 CANCEL switch
1 2 3 4 5
WARNING
• Do not use the cruise control function on the following roads, where using it
could be dangerous.
- A road with a heavy traffic, such as an urban road
- A road that includes sharp curves and steep downhill slopes
- An icy, snowy or otherwise slippery road
• Do not use the cruise control function when towing a vehicle.
Cruise Control Switch (Type 2)
No. Description
1 SET switch/- switch
2 RES switch/+ switch
3 Main switch
4 CANCEL switch
1 2 3 4
5108428_sec04_CONTROLS AND INSTRUMENTS_P143-end.indd 153 2020/11/12 15:28:55
To Next Page
Loading...
Need help?
General
