4-147
CONTROLS AND INSTRUMENTS
Move the selector lever to shift into each gear position. When moving the selector lever
from "P" into any other position, be sure to depress the brake pedal.
Regarding fundamental precautions on automatic transmissions, refer to "Automatic
Transmission Model".
Upshift
Downshift
Neutral
Drive
(auto mode)
Drive
(manual mode)
Reverse
Park
: Operate the selector lever while pressing
the push button.
: Operate the selector lever without pressing
the push button.
: Operate the selector lever without pressing
the push button. The selector lever will return
to the manual mode position when you release
your hand after operating the lever in the
direction of the arrow.
: Operate the selector lever while pressing
the push button with the brake pedal depressed.
Push button
Shift pattern
Automatic Transmission
Automatic Transmission Model
→ Refer to page 2-56
Shift Indicator → Refer to page 4-62
NOTE
• The shift pattern is on the selector lever knob.
• The shift pattern and the gear position are displayed on the MID.
5108428_sec04_CONTROLS AND INSTRUMENTS_P143-end.indd 147 2020/11/12 15:28:52
To Next Page
Loading...
Need help?
General
