4-140
CONTROLS AND INSTRUMENTS
Illumination Control Switch
This switch is used to adjust the brightness
of the illumination in the instrument panel.
Turning the switch up brightens the lights,
and turning the switch down darkens them.
The brightness can be adjusted with the
light control switch in the "AUTO" (with the
taillights "ON"), "
" or " " position.
NOTE
• Meter brightness is not adjusted in
coordination with illumination control
switch operation.
Bright
Dark
5108428_sec04_CONTROLS AND INSTRUMENTS_P001-142.indd 140 2020/11/09 14:07:05
To Next Page
Loading...
Need help?
General
