4-289
CONTROLS AND INSTRUMENTS
The manual Speed Limiter (MSL) is a function that restricts driving beyond the set
speed. The speed limit can be set between 30 km/h (20 MPH) and 160 km/h (100 MPH).
Manual Speed Limiter (MSL)
WARNING
• Be sure to turn off the system when the driver changes. If the driver changes
and the new driver does not recognize the MSL set speed, the vehicle does
not accelerate even when the accelerator pedal is depressed. Doing so is
dangerous because an accident could occur.
• Set the set speed within an appropriate speed range for road conditions,
environment, and to observe the speed limit.
• If a set speed lower than the vehicle speed while driving is set, the system
decelerates the vehicle. Always check the surrounding area to be safe when
using the system.
MSL Switch
No. Description
1 SET/+ switch
2 Main switch
3 CANCEL switch
4 SET/- switch
5 RES switch
1 2
345
NOTE
• The system is temporarily overridden when the accelerator pedal is depressed
strongly and the vehicle accelerates. When the vehicle speed falls to the set
speed or less, the system reactivates.
• On a downhill slope, the vehicle speed may exceed the set speed.
5108428_sec04_CONTROLS AND INSTRUMENTS_P143-end.indd 289 2020/11/12 15:29:10
To Next Page
Loading...
Need help?
General
