4-288
CONTROLS AND INSTRUMENTS
Settings (User Customization Function)
→ Refer to page 4-46
Settings of the TSR
The TSR settings can be changed by using the user customization function on the
MID.
Display indication Description
Traffic sign
recognition
Traffic sign
display
Enable Turns on the TSR
Disable Turns off the TSR
Speed warning
Visual and
Audible
Alerting the driver with a
display on the MID and a
buzzer
Visual only Alerting the driver with only a
display on the MID
Off Setting the warning of
exceeding the maximum speed
to off
Warning
threshold
2 km/h (1 mph) When the maximum speed
shown on the display is
exceeded by 2 km/h (1 MPH),
a warning is activated.
5 km/h (3 mph) When the maximum speed
shown on the display is
exceeded by 5 km/h (3 MPH),
a warning is activated.
10 km/h (6 mph) When the maximum speed
shown on the display is
exceeded by 10 km/h (6 MPH),
a warning is activated.
Stereo Camera → Refer to page 4-221
When the Stereo Camera is Unavailable
→ Refer to page 4-230
When the TSR Is Unavailable
If there is a problem with the stereo camera, the TSR does not operate.
If there is a problem with the stereo camera, the TSR cannot be used.
When the camera temporarily stops or malfunctions, the TSR does not operate.
5108428_sec04_CONTROLS AND INSTRUMENTS_P143-end.indd 288 2020/11/12 15:29:10
To Next Page
Loading...
Need help?
General
