4-180
CONTROLS AND INSTRUMENTS
ESC warning light
NOTE
• When the ESC is turned off, the
trailer sway control will also be
turned off. Be careful when towing
the trailer.
• When the trailer sway control is
in operation, the stop lights will
operate.
• When the 4WD switch is set to 4L
(4WD low) (models with 4WD), the
trailer sway control will not activate.
• Even when driving uncoupled,
trailer sway control may operate
depending on the driving condition.
• When there is an abnormality in the
trailer sway control related systems
or the brake system, the ESC
warning light will come on.
Trailer Towing → Refer to page 2-47
Multi-Collision Brake (MCB)
The multi-collision brake is a function that lowers the vehicle speed by automatically
applying brakes at the same time the airbag activates when a collision occurs. This
function contributes to the mitigation of secondary collision damage and the prevention
of the vehicle entering the opposite lane or going off the road.
When any of the airbags is deployed due to a collision, the brake is automatically
applied and the stop lights come on.
5108428_sec04_CONTROLS AND INSTRUMENTS_P143-end.indd 180 2020/11/12 15:28:58
To Next Page
Loading...
Need help?
General
