3-20
PRE-DRIVING OPERATIONS AND ADJUSTMENTS
NOTE
• Keep the mechanical key stored in the electronic key for use in such cases as
when electronic key battery goes flat or is broken.
• When the vehicle battery is weak or the voltage is low, the passive entry and
start system function may not be possible. In this case, use the mechanical key
to unlock the doors, and check the battery of the vehicle.
Doors →Refertopage 3-28
When the Electronic Key Battery Goes
Flat →Refertopage 7-7
Handling the Battery
→Refertopage6-119
Mechanical key
Knob
Passive Entry and Start System
Mechanical Key
Use the mechanical key to lock/unlock
the doors when either the battery for the
electronic key or that of the vehicle goes
flat.
To take the mechanical key out, slide the
knob and pull out the mechanical key.
When storing the mechanical key in the
electronic key, insert until a clicking sound
is heard.
The passive entry and start system is a system that enables doors to be locked and
unlocked and for the engine to be started remotely just by carrying the electronic key
in your pocket. The electronic key can also be used as a remote control unit of the
keyless entry system.
5108428_sec03_PRE-DRIVING OPERATIONS.indd 20 2020/11/06 10:49:01
To Next Page
Loading...
Need help?
General
