4-117
CONTROLS AND INSTRUMENTS
Combination Light Control Switch
Turning the light control switch to the
position indicated in the table causes the
relevant lights to illuminate.
When lights come on, the light position
indicator light located on the instrument
panel comes on.
The combination light control switch
is located at the position shown in the
diagram.
ADVICE
• Each light will come on regardless
of the power mode (models with
passive entry and start system)
or position of the starter switch
(models without passive entry and
start system). Do not operate the
combination lights for an extended
time period with the engine stopped.
Otherwise, the battery may go flat,
making it impossible to restart the
engine.
Light Control Switch
Combination light
control switch
Light position indicator light
NOTE
• When repeatedly turning the headlight bulbs on and off frequently, the service
life of the headlight bulbs will be reduced.
• For models with LED headlight, the clearance light also functions as the daytime
running light. The way they function depends on the driving situation.
5108428_sec04_CONTROLS AND INSTRUMENTS_P001-142.indd 117 2020/11/09 14:07:03
To Next Page
Loading...
Need help?
General
