4-116
CONTROLS AND INSTRUMENTS
LOCK : In this position, the key can be
inserted or removed.
Remove the key and turn the
steering wheel until it locks. The
steering wheel will be locked
to help prevent theft. To place
the starter switch in the "LOCK"
position, press and hold the key
in the "ACC" position and then
turn it to the "LOCK" position.
ACC : In this position, the audio and
other accessories can be used
with the engine stopped.
ON : The key stays in this position
while the engine is running.
All electrical components can be
used.
This position is also used for
preheating before starting the
engine.
START : The engine is started in this
position. Release the key as
soon as the engine has started.
The key automatically returns to
the "ON" position.
NOTE
• If the key cannot be turned
from the "LOCK" position to the
"ON" position, lightly move the
steering wheel clockwise and
counterclockwise while trying to turn
the key.
• In automatic transmission models,
the key cannot be removed from the
starter switch unless the selector
lever is placed in the "P" position.
5108428_sec04_CONTROLS AND INSTRUMENTS_P001-142.indd 116 2020/11/09 14:07:02
To Next Page
Loading...
Need help?
General
