4-141
CONTROLS AND INSTRUMENTS
Heated Seat Switch
The heated seat can be used when the
power mode is "ON" (models with passive
entry and start system) or the starter switch
is in the "ON" position (models without
passive entry and start system).
Every time the switch is pressed, it
switches between high, low, and off.
• High:
This is used to quickly warm the seat.
Two indicators are on when operating
in High.
• Low:
This is used to keep the seat warm.
One indicator is on when operating in
Low.
CAUTION
• The following persons should be
careful so as not to receive a low
temperature burn.
- Babies and infants, elderly
persons, sick persons and
physically-disabled persons
- Children
- Persons who take drowsy
medicines
- Persons with delicate skin
- Persons who are extremely
exhausted
- Persons who have drank alcohol
• To prevent overheating, do not use
the seat with blankets and cushion
that keep it too warm.
• To prevent low temperature burn,
do not use the heated seat function
when napping in the vehicle.
Heated seat switch
(right front seat)
Heated seat switch
(left front seat)
Indicator light
Heated seat switch
(right front seat)
Indicator light
Heated seat switch
(left front seat)
Manual transmission model
Automatic transmission model
5108428_sec04_CONTROLS AND INSTRUMENTS_P001-142.indd 141 2020/11/09 14:07:05
To Next Page
Loading...
Need help?
General
