4-118
CONTROLS AND INSTRUMENTS
Name
Position
OFF AUTO
Headlight
Off On/Off *2
Off
On
Clearance light (halogen
headlight model)
On
Taillight
License plate light
Illumination light control
Clearance light/daytime
running light (LED headlight
model)
On *1 On *1 *3 On *1 On *5
Daytime running light
(halogen headlight model)
On *1 On/Off *1 *4 On *1 Off
*1: The lights function as daytime running lights when the following conditions are met.
1) The engine has been started. 2) The selector lever is placed in any position other
than the "P" position (only for automatic transmission models). 3) The parking brake
has been released.
*2: When the power mode is "ON" (models with passive entry and start system) or
the starter switch is in the "ON" position (models without passive entry and start
system), the lights come on or go out automatically depending on the brightness
outside the vehicle.
*3: When the light control switch is in the "AUTO" position and the headlights are
off, the lights function as the daytime running lights. When the headlights are on,
the lights function as clearance lights and dim more than when functioning as the
daytime running lights.
*4: When the light control switch is in the "AUTO" position and the clearance lights
are off, the daytime running lights come on. When the clearance lights are on, the
daytime running lights go out.
*5: When the light control switch is in the "
" position, the lights will become dimmer
than when the switch is in the "OFF" position and function as clearance lights.
5108428_sec04_CONTROLS AND INSTRUMENTS_P001-142.indd 118 2020/11/09 14:07:03
To Next Page
Loading...
Need help?
General
