4-154
CONTROLS AND INSTRUMENTS
Setting to Your Desired Vehicle Speed
1. Press the main switch to set it to
"ON". The cruise control indicator light
comes on white.
Main switch
Cruise control indicator light (White)
CAUTION
• Remember that taking your foot off the accelerator when the cruise control
is engaged will not reduce vehicle speed. When going up or down hills, it is
possible for the vehicle to gain or lose speed, even though the cruise control is
engaged. If this happens while going up a hill, depress the accelerator pedal to
maintain the desired speed. If going down a hill, depress the brake pedal, which
will both disengage the cruise control and slow down the vehicle.
• Set the vehicle speed within an appropriate speed range for road conditions,
environment, and to observe the speed limit.
• While the cruise control is operating, the acceleration and brake control
according to the preceding vehicle is not performed. Depress the accelerator
pedal or brake pedal as necessary.
• If you feel any abnormality when using cruise control, cancel cruise control with
the main switch and have your vehicle inspected as soon as possible at your
Isuzu Dealer.
• When using cruise control in models with the adaptive cruise control, check the
display area to see which mode, the adaptive cruise control or regular cruise
control, is selected.
- When the adaptive cruise control is selected, the adaptive cruise control
indicator light comes on.
- When the cruise control is selected, the cruise control indicator light comes
on.
Type 1 Type 2
5108428_sec04_CONTROLS AND INSTRUMENTS_P143-end.indd 154 2020/11/12 15:28:55
To Next Page
Loading...
Need help?
General
