3-27
PRE-DRIVING OPERATIONS AND ADJUSTMENTS
Welcome Light
The welcome light is a function to turn the dome light on when you approach the
vehicle while carrying the electronic key.
ADVICE
• To prevent battery discharge, this function is automatically turned off if more
than 5 days have passed since the vehicle was last locked.
• Using this function consumes the vehicle battery more rapidly than normal.
Display indication Description
Welcome light
Enable Turns on the welcome light function.
Disable Turns off the welcome light function.
The settings of the welcome light can be changed by using the user customization
function on the MID.
Conditions for Welcome Light Standby Operation
The welcome light becomes operable when the following conditions are satisfied.
• Lock the doors by using the passive entry and start system or keyless entry
system.
• When the driver moves a certain distance away from the vehicle while carrying
the electronic key.
Conditions That Stop Welcome Light Operation
The welcome light does not come on if the following conditions are satisfied.
• When unlocking the doors by using the remote control unit.
• When the driver unlocks the doors with a mechanical key while not carrying the
electronic key.
• When 5 days have passed while the welcome light is in operation standby.
• When you have been within about 5 m (16 ft) from the vehicle for more than 5
minutes.
Settings (User Customization Function)
→Refertopage 4-46
5108428_sec03_PRE-DRIVING OPERATIONS.indd 27 2020/11/06 10:49:02
To Next Page
Loading...
