3-101
PRE-DRIVING OPERATIONS AND ADJUSTMENTS
WARNING
• If you encounter any of the following conditions, system errors have occurred.
Have your vehicle inspected/serviced at your Isuzu Dealer as soon as possible.
- If the SRS airbag warning light does not come on when the power mode is
switched to "ON" (models with passive entry and start system) or when the
starter switch is turned to the "ON" position (models without passive entry and
start system).
- If the SRS airbag warning light does not go out.
- If the SRS airbag warning light comes on while driving the vehicle.
• If you make unauthorized modifications to the vehicle or install an unauthorized
accessory, the seat belt with pretensioner and airbag may not operate correctly.
• If the steering wheel is changed to a non-standard one or a sticker is attached
to the steering wheel pad, there could be a danger of system malfunction or the
sticker flying off in the event of system activation. Attaching stickers or placing
such things as accessories or air fresheners on the top surface of the instrument
panel is also dangerous. They may prevent normal operation of the airbag or
could fly off in the event of system activation.
• Do not attach seat covers under any circumstances. If a seat cover is attached
or objects are placed in the area in which the side airbag or far side airbag
inflate, the airbags will not function correctly. Also, there could be a danger of
objects flying off in the event of the system activation.
• If hard objects such as hangers or accessories are attached to the grip or coat
hook, they may prevent normal operation of the curtain airbag and could fly off
in the event of system activation.
• Do not apply excessive force to nor strongly hit the airbag installation area, or
the base of the b-pillar/c-pillar. Doing so may result in erroneous activation of the
airbag or the seat belt with pretensioner.
WARNING (Continued)
5108428_sec03_PRE-DRIVING OPERATIONS.indd 101 2020/11/06 10:49:12
To Next Page
Loading...
Need help?
General
