4-108
CONTROLS AND INSTRUMENTS
Warning Buzzer pattern Condition
Shift position
(models with
passive entry and
start system)
Continuous beep
(external buzzer)
If the electronic key is carried outside the
vehicle and then the doors are closed
with the power mode in the "OFF" and the
selector lever in a position other than "P"
(automatic transmission model).
Short repeated beeps
(in-vehicle buzzer)
If the selector lever is moved to a position
other than "P" with the driver side door open
(automatic transmission model).
Three repeated beeps
(in-vehicle buzzer)
If starting of the engine is attempted
by pushing the engine start/stop button with
the selector lever in a position other than "P"
or "N" (automatic transmission model).
Three repeated beeps
(in-vehicle buzzer)
If starting of the engine is attempted
by pushing the engine start/stop button with
the gearshift lever in a position other than "N"
(manual transmission model).
Three repeated beeps
(in-vehicle buzzer)
If an attempt to switch the power mode from
"ON" to "OFF" is made with the selector
lever in a position other than "P" (automatic
transmission model).
Turn off the power
(models with
passive entry and
start system)
Short beep
(external buzzer)
If door locking is attempted by pressing the
request switch on the door handle or the lock
button on the electronic key with the power
mode is in "ON" or "ACC".
Low battery
electronic key
(models with
passive entry and
start system)
Three repeated beeps
(in-vehicle buzzer)
If the battery voltage of the electronic key is
low when the power mode is switched from
"ON" to "OFF" (or "ACC").
Check system
(models with
passive entry and
start system)
Three repeated beeps
(in-vehicle buzzer)
Continuous beep
(in-vehicle buzzer)
If an error occurs to the passive entry and
start system when door locking is attempted
by pressing the request switch on the door
handle or by pushing the engine start/stop
button.
Short beep
(external buzzer)
Continuous beep
(external buzzer)
Power
management
system
(models with
passive entry and
start system)
Three repeated beeps
(in-vehicle buzzer)
If an error occurs to the power management
system when the engine start/stop button is
pushed.
5108428_sec04_CONTROLS AND INSTRUMENTS_P001-142.indd 108 2020/11/09 14:07:02
To Next Page
Loading...
Need help?
General
