4-150
CONTROLS AND INSTRUMENTS
NOTE
• Each time you operate the selector lever to "+" (upshift) or "-" (downshift), the
gears shift one gear at a time.
• Shift into the gear that is appropriate for the vehicle speed. If an inappropriate
gear shift position is selected, a warning buzzer will sound and the shift will not
occur.
• The gear is automatically shifted down to the 1st gear when the vehicle is
stopped.
• To return to the auto mode, place the selector lever into the "D" (auto mode)
position.
• On a snowy or icy road, you can pull away in the manual mode 2nd gear (2nd
start mode).
Drive (Manual Mode)
When the selector lever is shifted from the
"D" position to the right, the transmission
is switched from auto mode to manual
mode. In manual mode, the gears can be
selected by operating the selector lever to
"+" (upshift) or "-" (downshift).
2nd Start Mode → Refer to page 4-151
5108428_sec04_CONTROLS AND INSTRUMENTS_P143-end.indd 150 2020/11/12 15:28:53
To Next Page
Loading...
Need help?
General
