4-310
CONTROLS AND INSTRUMENTS
Settings of LDP
The LDP settings can be changed by using the user customization function on the
MID.
Settings (User Customization Function)
→ Refer to page 4-46
NOTE
• When only a warning is issued, only the LDW operates and the steering assist
does not operate.
• Even if the LDP is turned off by using the user customization function, the
system is turned on again when the engine is restarted.
Display indication Description
Lane support
settings
Lane departure
prevention
Assist and
warning
Issues a warning and performs
steering assist
Warning only Only issues a warning
Off
Turns off the LDP (cancels a
warning and steering assist)
5108428_sec04_CONTROLS AND INSTRUMENTS_P143-end.indd 310 2020/11/12 15:29:12
To Next Page
Loading...
