4-332
CONTROLS AND INSTRUMENTS
If you do not want the attention assist to operate, it is possible to turn off the system.
The settings of the attention assist can be changed by using the user customization
function on the MID.
Settings (User Customization Function)
→ Refer to page 4-46
NOTE
• Even if the attention assist system
is turned off by using the user
customization function, the system
is turned on again when the engine
is restarted.
Turning Off the Attention Assist
Display indication Description
Lane support
settings
Attention assist
Enable Turns on the attention assist
Disable Turns off the attention assist
5108428_sec04_CONTROLS AND INSTRUMENTS_P143-end.indd 332 2020/11/12 15:29:14