7-8
IN CASE OF EMERGENCY
4. When attempting to change the power
mode, push the engine start/stop
button within 10 seconds.
When attempting to start the engine,
perform the following operations
within 10 seconds.
5. Make sure that the parking brake
lever is fully pulled.
6. If your vehicle is a manual
transmission model, make sure
that the gearshift lever is in the "N"
position and then depress the clutch
pedal and brake pedal fully.
In an automatic transmission model,
make sure that the selector lever is in
the "P" position and then depress the
brake pedal fully.
7. With the pedal(s) depressed, push the
engine start/stop button. The engine
start/stop button indicator light will
then change from flashing to being
continuously illuminated and the
engine will start.
2. Put the electronic key near the engine
start/stop button while the engine
start/stop button indicator light is
flashing (within 10 seconds).
3. The buzzer sounds and the flashing of
the engine start/stop button indicator
light will change from fast to slow and
the procedure for starting the engine
will be displayed in the MID.
Manual transmission model
English
Automatic transmission model
English
Turkish
Turkish
5108428_sec07_IN CASE OF EMERGENCY.indd 8 2020/11/13 14:57:09
To Next Page
Loading...
Need help?
General
