40
b. To print results obtained by a specific operator, press 2 to display the Print by OID screen.
Scan or type the OID, then press ENTER. All patient test results obtained by the specified operator
are printed.
c. To print results obtained on a specific date, press 3 to display the Print by Date screen:
Enter the date using the keypad, then press ENTER. All patient test results obtained on the
specified date are printed.
d. To print all results for a specific assay, press 4 to display the Print by Assay screen:
Note: If the desired assay is not shown, press 7 to display additional assays.
Enter the number for the assay, then press ENTER. All patient test results for the specified assay
are printed.
e. To print results for a specific cuvette lot number, press 5 to display the Print by CVlot screen:
Scan or type the cuvette lot number, then press ENTER. All patient test results for the specified
cuvette lot number are printed.
f. Press CANCEL to return to the menu for printing patient results (Step 1).
To Print QC Results:
1. Press 5 to display the menu for printing QC results:
2. Print the results for the desired tests:
a. To print QC results obtained by a specific operator, press 1 to display the Print by OID screen:
Scan or type the OID, then press ENTER. All QC test results obtained by the specified operator are
printed.
To Next Page
Loading...
Need help?
General
