To Next Page

To Previous Page

System Commands

Chapter2 System Commands

STATus:QUEStionable[:EVENt]?

This command can be used to read the value in query event register.The power

supply will return a decimal number corresponding to the binary weighted sum

of each unit digit of register. These digits will be latched. After executing this

command, the query event register will be cleared.

Arguments

None

Returns

<value>

Related Command

STATus:QUEStionable:ENABle

This command edits the enable register value of query event. In query, the power

supply will return a decimal number representing the binary weighted sum of the

enable register.

Description of the register.:

Bit 0

VO, Overvoltage

Bit 1/2

CO, Overcurrent

Bit 3

Retain 1

Bit 4

OP,Overpower

Bit 5

TO,Over-temperature

Bit 6

TtlO, Over-total power

Bit 7

MO, Memory error

Bit 8

Retain 2

Command syntax

STATus:QUEStionable:ENABle <value>

Arguments

<value> 0～65535

Example

STATus:QUEStionable:ENABle 16

ITech IT7622 Programming Guide

Other manuals for ITech IT7622