ITech IT7622 - Fetch[:Scalar]:Current:peak:plus; Fetch[:Scalar]:Current:peak:minus; Fetch[:Scalar]:Current:isurge; Measure[:Scalar]:Voltage

System Commands
Copyright© Itech Electronic Co., Ltd. 28
Returns
<float>
FETCh[:SCALar]:CURRent:PEAK:PLUS?
This command is used to read the A current readings at maximum positive peak.
Command syntax
FETCh[:SCALar]:CURRent:PEAK:PLUS? <A>
Arguments
<A>
Returns
<float>
FETCh[:SCALar]:CURRent:PEAK:MINUs?
This command is used to read the A current readings at maximum negative peak.
Command syntax
FETCh[:SCALar]:CURRent:PEAK:MINUs? <A>
Arguments
<A>
Returns
<float>
FETCh[:SCALar]:CURRent:ISURge?
This command is used to read the A surge currents.
Command syntax
FETCh[:SCALar]:CURRent:ISURge? <A>
Arguments
<A>
Returns
<float>
MEASure[:SCALar]:VOLTage?
This command is used to read the A real-time voltages.