ITech IT7622 - Fetch[:Scalar]:Voltage:harmonics:distort

System Commands
Copyright© Itech Electronic Co., Ltd. 36
Returns
<float>
MEASure[:SCALar]:VOLTage:HARMonics:DISTort?
FETCh[:SCALar]:VOLTage:HARMonics:DISTort?
This command is used to read the real-time measured voltage distortion of a
harmonic.
Command syntax
MEASure[:SCALar]:VOLTage:HARMonics:DISTort? <A|B|C>,<TOTal|value>
FETCh[:SCALar]:VOLTage:HARMonics:DISTort?<A|B|C>,TOTal|ALL|order
Arguments
<A|B|C>,
<TOTal| value>
Returns
<float>
MEASure[:SCALar]:CURRent:HARMonics[:AMPLitude]
?
FETCh[:SCALar]:CURRent:HARMonics[:AMPLitude]?
This command is used to read the real-time measured current amplitude of a
harmonic.
Command syntax
MEASure[:SCALar]:CURRent:HARMonics[:AMPLitude]?
<A|B|C>,<FUNDamental|TOTal| ALL|value>
FETCh[:SCALar]:CURRent:HARMonics[:AMPLitude]?<A|B|C>,FUNDamental|
TOTal|ALL|order
Arguments
<A|B|C>,
<FUNDamental|TOTal|ALL|value>
Returns
<float>