ITech IT7622 - Wave:trigger:voltage[:Level]; Wave:trigger:current[:Level]

System Commands
Copyright© Itech Electronic Co., Ltd. 41
Command syntax
WAVE:TRIGger:VOLTage[:LEVel]
Arguments
<value>
Arguments range
Refer to the specifications.
Unit
V
Query syntax
WAVE:TRIGger:VOLTage[:LEVel]?
Returns
<value>
WAVE:TRIGger:VOLTage[:LEVel]?
This command is used to query the voltage trigger level.
Command syntax
WAVE:TRIGger:VOLTage[:LEVel]?
Arguments
None
WAVE:TRIGger:CURRent[:LEVel]
This command is used to set the current trigger level
Command syntax
WAVE:TRIGger:CURRent[:LEVel]
Arguments
<value>
Arguments range
Refer to the specifications.
Unit
A